DEWALT DW723 Miter Saw Stand

Amazon Sales Rank: #37991 in Home ImprovementBrand: DEWALTModel: DW723Number of items: 1Dimensions: 8.75" h x 11.00" w x 75.00" l, 46.38 pounds Universal design works with all brands of miter sawsLightweight aluminum construction (35 lbs.) allows for easy transport to and from the jobsite5-1/2-inch beam extends to support up to 16 ft. of material and up to 400 lbs.Legs provide superior support and fold for easy storageWork stops/supports can be repositioned quickly anywhere along the rail; Non-marring feet on tool mount will not scratch material

The DEWALT Miter Saw Stand offers large-capacity material support without sacrificing portability, so you can make quick, accurate cuts with ease. This stand features a universal design that works with a wide variety of saws. Its lightweight, aluminum construction has the ability to support materials that weigh up to 400 pounds and measure up to 16 feet in length. Boasting portability and strength, this miter saw stand can go with you to the jobsite and back and tackle tough applications.Miter Saw StandAt a Glance:Durable yet lightweight aluminum constructionSupports 400 pounds and materials up to 16 feet longAdjustable stops can be repositioned anywhere along railFolding design allows for easy transportThree-year limited warranty, one-year free service, and 90-day money-back guaranteeThis miter stand supports materials that weigh up to 400 pounds and measure up to 16 feet in length. View larger.When fully extended, this stand measures 151 inches wide and 33 inches high.View larger.Sturdy, Lightweight Aluminum ConstructionThanks to its aluminum construction, this DEWALT saw stand is both strong and lightweight. At just 35 pounds, the stand is easy to transport, giving you the advantage of a versatile, stable saw setup--no matter where your job takes you and your miter saw. When you are ready to pack up, the stand's convenient bracket system allows you to unhook your saw in seconds and store or transport the two pieces separately in your truck or shop.The stand's legs are angled to provide superior support and can be folded up for storing. When all components are fully extended, the stand measures a generous 151 inches wide and 33 inches high. This stand conveniently folds up to a compact 72 inches wide and 6 inches high for storing between jobs.Extending Beam Design Delivers Big CapacityThe DEWALT miter saw stand has two 5-1/2-foot horizontal beam structure that extends to provide support for materials measuring up to 16 feet long. It can also support an impressive 400 pounds. The work stops can be repositioned quickly anywhere along the rail, providing the support you need where you need it most.Compatible with All Brands of Miter SawsThis stand features a universal design that is compatible with all brands of miter saws. That means you can buy additional saw brackets (sold separately) and use with a variety of saws or you can continue to use this stand even if you upgrade to a new miter saw.This miter saw stand comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.What's in the BoxDW723 DEWALT Miter Saw Stand, two convertible work supports/stops, and two mounting brackets.DEWALT DW723 Miter Saw Stand

Most helpful customer reviews347 of 356 people found the following review helpful.Some Good Some BadBy Richard D AumanThis is a good product with some flaws. The Good:Very portable and fast and easy to set up.It is stable (much more stable than it looks).Long adjustable supports.Flip stops are handy for repetitive cuts.The price - quite reasonable when you look at the competition (or even the previous version of this stand).The Bad:The biggest problem is that the supports are just too small. Yes you can position the support 12' from the blade but there is no support in between. This is a problem when squaring the ends of 16' mdf moldings - they really sag. Cutting mdf moldings upright is even worse - a slight bend in this scenario results in the molding falling of the front or back of the support.The supports adjust easily to match the height of your saw. The problem? Plan on adjusting them constantly because they will not stay put. Also the beams that the supports sit on have some wiggle room to allow them to slide in and out. At full extension the beam can be move as much as 3/4" up or downMy review is somewhat negative because I wanted potential buyers see both sides - all the glowing reviews hide some flaws. However, I still really love this stand. You can not beat the portability of this stand. The problems I have found have been solved in some other stands but those things are just huge beasts. The portability is far more important to me. Also the stiffer your material the better. The stand really shines for rough carpentry - where small variances with the stops don't matter, the height of the supports can be off a bit, and the material is straight enough to not fall off the support or sag in between. I have often cut 4 x 12's for headers (as long as 14') and the stand held the up perfectly. Most of my grievances only arrise when using MDF moldings. The fact that I do so regularly is probably the biggest factor in my 3 star rating. In case you were wondering - I'm a contractor and I have used this stand almost every day for about 18 months.54 of 54 people found the following review helpful.More than just a large saw horse.By Samurai DaveI've have cut my share of board feet while squating in front of my miter saw while it was on the floor. As I get older, this was going from being inconvenient, to a real pain in the back. (Literally!) There was no way to support the ends of the board other than shimming with scrap lumber prior to each cut. I tried mounting it on top of my B&D Workmate, but supporting the ends of the boards became even more of an issue. I knew I wanted a mitersaw stand, but which one? I liked different features of the different stands I reviewed, like large wheels, heavy construction and additional work supports. Some looked like I could copy their design and weld from square tubular steel. Weight would be a consideration. Combine this with the weight of the saw, it could be over 160 pounds. Getting it into and out of my SUV without trashing my bumper (and my back) would be a trick. Using aluminum rectangular tubing would be lighter, but really pricey! After looking at the others, I decided on the Dewalt 723. I am glad I did! Most of the others come in kit form, the 723 is fully assembled. It folds into a compact package, is relatively light, very sturdy, made from high quality components, and it is one of the most professional looking stands around (especially when mounting a matching Dewalt miter saw on it!).Most bolts have Allen-wrench heads. Any that are adjusted often (such as the extention arms and supports) have large T-handles. All nuts are the type that have nylon lock-washers to keep from vibrating loose. The saw brackets attach (and detach) quickly from the main beam. There are rubber feet attached to the brackets so the saw can be used alone on a bench (or on the floor...) if desired. The arms will support 99.5% of the lumber I will be chopping without sagging. When I want to throw an 8' 4x12 on the stand, it will require supports (2x2s will do) clamped to the arm, extending down to the ground. Other stands have these extra supports already attached, but are unneccessary for the vast majority of my cuts; and will only add to the weight and complexity of break-down for transport.By folding down my rear seat of my SUV, I can get the stand to fit with ease. The saw is detached, and placed next to it. I will probably attach a pair of 10" phenumatic wheels to one end for easier protability around a job site. I like the table saw extention the Delta folks have on their stand (model 50-155), and will incorprorate a small extention similar to theirs on the DW723. There are some cheaper stands around, but they were either too heavy (up to 90 lbs for the stand alone!) or too flimsy (for mounting a DW708 12" compound sliding miter saw). The package arrived in fine shape with no damage to the stand. I highly recommend this stand. Now that I have one, I wonder why I didn't get one sooner. I'll never go back to squating on the floor again.45 of 48 people found the following review helpful.So You're A Serious DIY'er?By A CustomerLet me say up front that if I owned a DeWalt miter saw, I'd give this stand a perfect 5. As a previous reviewer brought up, the Makita saw is a bit deeper, and for some reason the rear mounting holes are inset from the front mounting holes. No problem if you are resourceful, and have a little angle iron on hand. Being able to adapt additional mounting rails to a variety of tools could make this an extremely versatile tool. Imagine unclipping your miter saw, and dropping on a tablesaw, bandsaw, or sander, with each swap taking less than 30 seconds! After I fabricated a few mounting rail extensions for my Makita, the saw dropped onto the mounting rail like silk! There's a lot to like about this stand. It is immediately solid, and no hint of being tipsy even when the sawhead on the 12" saw is locked to the rear position. I was concerned that the extensions would be too flimsy to support a long deck board, but after I leveled the extension to the table (more on this later) it was very solid, and sliding the 2x6x12 back & forth as when you are aligning a cut mark, there was very little deflection or bouncing. After I initially mounted the saw, I found that the Makita table is higher than the supports will go. I plan to modify a set of my own design to match my saw. DeWalt may have balked at making a more universal base, but the fact is there are a LOT of different brands of saws out there and only a handful of quality tables available. Don't know about the big boys, but I've never turned up my nose at a potential revenue stream! In the folded position, the stand is a little bulky, especially after hoisting 2x goods all day, but not too bad. From the time the stand comes off the truck to set up & ready to work, has been as fast as 2 minutes! I don't think the Trojan can be set up that fast, and that table is very tipsy with a 12" saw mounted to the rear of the table. If you have a DeWalt saw, this stand is a no-brainer. If you have a different brand of saw, I'd advise taking the time to make a plywood base as instructed by DeWalt to mount your particular saw. This one is tough and ready to go to work right out of the box. Happy Cutting!See all 212 customer reviews...